Custom Line. Bigger Spools. Better Margins.

Custom bulk fishing line, built to boost your profits

Custom bulk spools and private-label fishing line for spooling services, rig builders, charters and tackle brands — built for lower line costs and bigger margins on everything you make, run or sell with it.

Calculate your profit Get your sample
Do the math first

How much is your line really costing you?

If line is a raw material for your business, every cent per yard compounds. Set your daily usage and what you pay today — the entry level of our range starts at 2¢ a yard.

1,500
10¢

2¢/yd is our entry-level line — a ceiling on the savings, not a quote. Most custom specs land higher, and your written quote depends on category, diameter and volume. This tool is here to show how much room there is — your written quote is the real number.

Extra gross profit, per year
$43,200
running 1,500 yd/day, moving from 10¢ to entry-level 2¢ per yard
That's every month$3,600
Who we serve

Three businesses run on our line

Different models, same truth: line is a cost center until your supplier treats it like your raw material. Find yourself below.

Build or spool with it

Makers & spooling services

Rig & terminal-tackle makers · spooling stations

Lower consumable cost, steadier output, batch-to-batch consistency
  • Big-brand bulk is expensive — and the supply is never steady
  • Batch quality drifts, and your finished rigs inherit the drift
  • Cheap coatings shed dye and grind down spooling machines
  • The sizes you actually need are always the ones out of stock
Run a business with it

Charters, clubs & tournaments

Charter captains · fishing clubs · tournament organizers

Happier clients, standardized gear, line costs under control
  • Weak line fails on the water — in front of paying customers
  • Short line life means constant respooling and downtime
  • Retail-priced consumables eat the operating budget
Brand & sell it

Retailers & tackle brands

Retailers · distributors · wholesalers · online tackle brands

Launch your own label faster, at real margins, with product that holds up
  • Private-label minimums are too high to test a market
  • Unstable quality kills repeat purchase — and your brand with it
  • Reselling the big names leaves no room for differentiation or margin
Products & solutions

One floor, three line categories, your spec

Braided PE fishing line spools — X4 to X16

Braided line

Our flagship. 8-strand construction, 38 picks per inch — a tight, round profile that runs thinner, casts farther and holds its rating.

Bulk braided line →
 Premium 100% PVDF fluorocarbon line spools

Fluorocarbon

Leader and mainline grades for rigs, spooling and private label — produced on the same floor, tested on the same bench.

Fluorocarbon leader →
 Bulk nylon monofilament spools in multiple colors

Monofilament

Workhorse mono in bulk lengths and custom diameters, for spooling services and house-brand programs.

Bulk monofilament →
Break strength
3–1,000 lb
Diameter
0.02–5.0 mm
Bulk spools
From 1 spool
Private label
From 100 pcs
Value added

Market-fit development

Tell us your water and your customers — we research local fisheries and help spec a product that fits them, not a catalogue copy.

Value added

Trial runs from 100 pcs

Test a market before you commit to it. Low-MOQ pilot production gets your label on real product, fast.

Value added

Packaging & go-to-market

In-house packaging design plus launch-ready visual assets, so your line arrives ready to sell — not just ready to ship.

Made, not sourced

Twenty years on our own factory floor

We spin, braid, dye, coat and spool under one roof, and every batch crosses a calibrated test bench before it crosses the ocean. The numbers below are how we run the floor.

500+
braiding machines running on our own floor
1,000,000 m
daily production capacity across the three line categories
±0.010 mm
diameter tolerance — the label number is the micrometer number
+5–10%
measured break over the label rating, batch after batch — tested, never inflated
100%
full length on every spool — no short-measured meters
7 days
dispatch on standard orders; custom runs quoted with the spec
99.5%
first-pass inspection rate on finished product
2005
the year this family started making line. Same family, same floor
Straight off our floor

Real machines, real bench, real photos

Everything below was shot in our own facility — the floor your spools come off and the bench your batch reports come from.

Technician running a tension test on the QC benchBreak-strength testing
Microscope inspection of braided lineWeave inspection
Precision balance used for line density checksDensity & diameter control
UHMWPE gel-spun fiber before braidingUHMWPE fiber, pre-braid
Bulk spools on the twisting lineTwisting line
Winding machines with bulk spoolsWinding floor
Where our line ends up

On shelves, on benches, on the water

Tackle shop counter stocked with colored bulk line spoolsBulk spools on a shop counter
Bulk spool with a finished rig tied from itTied straight off the bulk spool
Retail line program on display at a trade showA retail program at a trade show
How it works

Four steps from sample to your door

Step 1

Test a sample

Tell us what you run and we ship a sample spool to test hard before you spend anything.

Step 2

Get your quote

Category, diameter, length, volume — quoted direct and in writing against your spec.

Step 3

Custom production

Standard orders dispatch in 7 days; trial and custom runs are scheduled with the quote.

Step 4

Receive & reorder

Door-to-door delivery with duties handled. Batch test data ships with the goods.

Straight answers

Questions buyers actually ask

What's the minimum order for bulk spools?
One spool. Bulk starts at a single 1,000 m spool in your diameter, and scales from there. You don't need a container commitment to get factory-direct pricing.
Do you do OEM / private label, and what's the minimum?
Yes, your brand on our line. Trial runs start at 100 pieces per SKU with your label and packaging, low enough to validate a market before you commit real money to it. Printed retail boxes carry a one-time setup fee; formats are on the packaging page, and the full program is on the tackle brands page.
Do you make braid, fluorocarbon and monofilament?
All three, on our own floor: braid from 3 to 1,000 lb, plus fluorocarbon and monofilament in bulk lengths and custom diameters from 0.02 to 5.0 mm.
Is the rated strength real?
Every batch goes on a calibrated pull tester before shipping, and measured breaks run 5–10% above the label rating — the label is a minimum we test to, not a marketing number. Batch data is available with your order.
How fast do you ship?
Standard orders dispatch in 7 days. Custom and private-label runs are scheduled when we quote, so you know the date before you commit. Delivery is door-to-door with duties handled.
Do you ship to Europe and other countries outside the US?
Yes. We supply buyers in the USA and worldwide, shipped from our factory in Dongyang, China. Give us your delivery country and the written quote covers freight and lead time for it; freight is quoted by actual weight. Delivery terms for your country, including whether the price is DDP, are stated on the quote.
What should I send to get a quote?
Line type and grade, diameters or pound tests, color, spool length, quantity per size, packaging (label sticker or printed box) and your delivery country. Price depends on diameter, length, volume and packaging, so we don't publish a price list; with those details the quote comes back in writing as a per-unit price, not a range.
How do I get a sample?
Use the form below. Tell us what you run through in a normal week and we'll match the sample to your use — spooling, rig building, on-the-water or retail.
Start with a sample

Test our line before you take our word

Tell us what you run and where line fits in your business. We'll ship a sample spool and follow up with a written quote against your spec.

WhatsApp +86 150 6065 2605 US +1 626-800-3586 fiona@bulkfishingline.com